segmentation

class mfai.pytorch.lightning_modules.segmentation.SegmentationLightningModule(model, type_segmentation, loss)

Bases: LightningModule

Parameters:

• model (BaseModel)

• type_segmentation (Literal['binary', 'multiclass', 'multilabel', 'regression'])

• loss (_Loss)

configure_optimizers()

Choose what optimizers and learning-rate schedulers to use in your optimization. Normally you’d need one. But in the case of GANs or similar you might have multiple. Optimization with multiple optimizers only works in the manual optimization mode.

Return type:

Adam

Returns:

Any of these 6 options.

• Single optimizer.

• List or Tuple of optimizers.

• Two lists - The first list has multiple optimizers, and the second has multiple LR schedulers (or multiple lr_scheduler_config).

• Dictionary, with an "optimizer" key, and (optionally) a "lr_scheduler" key whose value is a single LR scheduler or lr_scheduler_config.

• None - Fit will run without any optimizer.

The lr_scheduler_config is a dictionary which contains the scheduler and its associated configuration. The default configuration is shown below.

lr_scheduler_config = {
    # REQUIRED: The scheduler instance
    "scheduler": lr_scheduler,
    # The unit of the scheduler's step size, could also be 'step'.
    # 'epoch' updates the scheduler on epoch end whereas 'step'
    # updates it after a optimizer update.
    "interval": "epoch",
    # How many epochs/steps should pass between calls to
    # `scheduler.step()`. 1 corresponds to updating the learning
    # rate after every epoch/step.
    "frequency": 1,
    # Metric to monitor for schedulers like `ReduceLROnPlateau`
    "monitor": "val_loss",
    # If set to `True`, will enforce that the value specified 'monitor'
    # is available when the scheduler is updated, thus stopping
    # training if not found. If set to `False`, it will only produce a warning
    "strict": True,
    # If using the `LearningRateMonitor` callback to monitor the
    # learning rate progress, this keyword can be used to specify
    # a custom logged name
    "name": None,
}

When there are schedulers in which the .step() method is conditioned on a value, such as the torch.optim.lr_scheduler.ReduceLROnPlateau scheduler, Lightning requires that the lr_scheduler_config contains the keyword "monitor" set to the metric name that the scheduler should be conditioned on.

Metrics can be made available to monitor by simply logging it using self.log('metric_to_track', metric_val) in your LightningModule.

Note

Some things to know:

• Lightning calls .backward() and .step() automatically in case of automatic optimization.

• If a learning rate scheduler is specified in configure_optimizers() with key "interval" (default “epoch”) in the scheduler configuration, Lightning will call the scheduler’s .step() method automatically in case of automatic optimization.

• If you use 16-bit precision (precision=16), Lightning will automatically handle the optimizer.

• If you use torch.optim.LBFGS, Lightning handles the closure function automatically for you.

• If you use multiple optimizers, you will have to switch to ‘manual optimization’ mode and step them yourself.

• If you need to control how often the optimizer steps, override the optimizer_step() hook.

forward(inputs)

Runs data through the model. Separate from training step.

Return type:

Tensor

Parameters:

inputs (Tensor)

get_hparams()

Return the hparams we want to save in logger.

Return type:

dict

get_metrics()

Defines the metrics that will be computed during valid and test steps.

Return type:

MetricCollection

last_activation(y_hat)

Applies appropriate activation according to task.

Return type:

Tensor

Parameters:

y_hat (Tensor)

on_test_epoch_end()

Logs metrics in logger hparams view, at the end of run.

Return type:

None

on_test_start()

Called at the beginning of testing.

Return type:

None

on_train_epoch_end()

Called in the training loop at the very end of the epoch.

To access all batch outputs at the end of the epoch, you can cache step outputs as an attribute of the LightningModule and access them in this hook:

class MyLightningModule(L.LightningModule):
    def __init__(self):
        super().__init__()
        self.training_step_outputs = []

    def training_step(self):
        loss = ...
        self.training_step_outputs.append(loss)
        return loss

    def on_train_epoch_end(self):
        # do something with all training_step outputs, for example:
        epoch_mean = torch.stack(self.training_step_outputs).mean()
        self.log("training_epoch_mean", epoch_mean)
        # free up the memory
        self.training_step_outputs.clear()

Return type:

None

on_train_start()

Setup custom scalars panel on tensorboard and log hparams. Useful to easily compare train and valid loss and detect overtfitting.

Return type:

None

on_validation_epoch_end()

Called in the validation loop at the very end of the epoch.

Return type:

None

on_validation_start()

Called at the beginning of validation.

Return type:

None

probabilities_to_classes(y_hat)

Transfrom probalistics predictions to discrete classes.

Return type:

Tensor

Parameters:

y_hat (Tensor)

test_step(batch, batch_idx)

Computes metrics for each sample, at the end of the run.

Return type:

None

Parameters:

• batch (Tuple[Tensor, Tensor])

• batch_idx (int)

training_step(batch, batch_idx)

Here you compute and return the training loss and some additional metrics for e.g. the progress bar or logger.

Parameters:

• batch (Tuple[Tensor, Tensor]) – The output of your data iterable, normally a DataLoader.

• batch_idx (int) – The index of this batch.

• dataloader_idx – The index of the dataloader that produced this batch. (only if multiple dataloaders used)

Return type:

Any

Returns:

• Tensor - The loss tensor

• dict - A dictionary which can include any keys, but must include the key 'loss' in the case of automatic optimization.

• None - In automatic optimization, this will skip to the next batch (but is not supported for multi-GPU, TPU, or DeepSpeed). For manual optimization, this has no special meaning, as returning the loss is not required.

In this step you’d normally do the forward pass and calculate the loss for a batch. You can also do fancier things like multiple forward passes or something model specific.

Example:

def training_step(self, batch, batch_idx):
    x, y, z = batch
    out = self.encoder(x)
    loss = self.loss(out, x)
    return loss

To use multiple optimizers, you can switch to ‘manual optimization’ and control their stepping:

def __init__(self):
    super().__init__()
    self.automatic_optimization = False


# Multiple optimizers (e.g.: GANs)
def training_step(self, batch, batch_idx):
    opt1, opt2 = self.optimizers()

    # do training_step with encoder
    ...
    opt1.step()
    # do training_step with decoder
    ...
    opt2.step()

Note

When accumulate_grad_batches > 1, the loss returned here will be automatically normalized by accumulate_grad_batches internally.

val_plot_step(batch_idx, y, y_hat)

Plots images on first batch of validation and log them in logger. Should be overwrited for each specific project, with matplotlib plots.

Return type:

None

Parameters:

• batch_idx (int)

• y (Tensor)

• y_hat (Tensor)

validation_step(batch, batch_idx)

Operates on a single batch of data from the validation set. In this step you’d might generate examples or calculate anything of interest like accuracy.

Parameters:

• batch (Tuple[Tensor, Tensor]) – The output of your data iterable, normally a DataLoader.

• batch_idx (int) – The index of this batch.

• dataloader_idx – The index of the dataloader that produced this batch. (only if multiple dataloaders used)

Return type:

Any

Returns:

• Tensor - The loss tensor

• dict - A dictionary. Can include any keys, but must include the key 'loss'.

• None - Skip to the next batch.

# if you have one val dataloader:
def validation_step(self, batch, batch_idx): ...


# if you have multiple val dataloaders:
def validation_step(self, batch, batch_idx, dataloader_idx=0): ...

Examples:

# CASE 1: A single validation dataset
def validation_step(self, batch, batch_idx):
    x, y = batch

    # implement your own
    out = self(x)
    loss = self.loss(out, y)

    # log 6 example images
    # or generated text... or whatever
    sample_imgs = x[:6]
    grid = torchvision.utils.make_grid(sample_imgs)
    self.logger.experiment.add_image('example_images', grid, 0)

    # calculate acc
    labels_hat = torch.argmax(out, dim=1)
    val_acc = torch.sum(y == labels_hat).item() / (len(y) * 1.0)

    # log the outputs!
    self.log_dict({'val_loss': loss, 'val_acc': val_acc})

If you pass in multiple val dataloaders, validation_step() will have an additional argument. We recommend setting the default value of 0 so that you can quickly switch between single and multiple dataloaders.

# CASE 2: multiple validation dataloaders
def validation_step(self, batch, batch_idx, dataloader_idx=0):
    # dataloader_idx tells you which dataset this is.
    x, y = batch

    # implement your own
    out = self(x)

    if dataloader_idx == 0:
        loss = self.loss0(out, y)
    else:
        loss = self.loss1(out, y)

    # calculate acc
    labels_hat = torch.argmax(out, dim=1)
    acc = torch.sum(y == labels_hat).item() / (len(y) * 1.0)

    # log the outputs separately for each dataloader
    self.log_dict({f"val_loss_{dataloader_idx}": loss, f"val_acc_{dataloader_idx}": acc})

Note

If you don’t need to validate you don’t need to implement this method.

Note

When the validation_step() is called, the model has been put in eval mode and PyTorch gradients have been disabled. At the end of validation, the model goes back to training mode and gradients are enabled.